{"title":"Roofing","description":"","products":[{"product_id":"tramex-roofing-master-kit-rmk","title":"Roofing Master Kit","description":"\u003ch1\u003eTramex Roofing Master Kit RMK\u003c\/h1\u003e\n\u003ch2\u003eNon Destructive Flat Roof Scanner For Leak Detection, Tracing And Moisture Measuring And Surveying\u003c\/h2\u003e\n\u003ch4\u003eWith Accompanying Bluetooth App\u003c\/h4\u003e\n\u003cp\u003eThe Tramex RMK is the complete kit for the Roofing Professional, including the Dec Scanner and the RWS Roof \u0026amp; Wall Scanner allowing for continuous and point-of-contact, non-destructive surveying of moisture conditions in roofing and waterproofing systems up to 6 inches in depth.\u003c\/p\u003e\n\u003cp\u003eThe kit also allows for non-destructive measurement of moisture conditions in concrete decks and pin readings in wood decks and roofing materials, relative humidity readings, and ambient and dew point conditions using the Tramex CMEX5 digital moisture meter and probes.\u003c\/p\u003e\n\u003cp\u003eAn infrared surface thermometer gives surface temperature.\u003c\/p\u003e\n\u003cp\u003eThis kit comes in a protective heavy-duty wheeled carry case with die-cut foam lining.\u003c\/p\u003e\n\u003cp\u003eThe Tramex Roof Master Kit is used to perform ASTM D7954.\u003c\/p\u003e\n\u003cp\u003eBluetooth connectivity to the Tramex Meters App allows for visualization of Tramex CMEX5 readings and data reporting to mobile devices, to GeoTag test results, create, save and share photos, reports and charts, as well as see your CMEX5 meter screen on your phone when extending to hard to reach places.\u003c\/p\u003e\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Dec Scanner\u003c\/li\u003e\n\u003cli\u003e1 x Roof and Wall Scanner + telescopic handle (for use on roofs) - RWS\u003c\/li\u003e\n\u003cli\u003e1 x Concrete Moisture Encounter X5 - CMEX5.\u003c\/li\u003e\n\u003cli\u003e1 xHand held electrode with 200mm insulated pins - SP200\u003c\/li\u003e\n\u003cli\u003e1 x 260mm narrow RH probe - RHP-NWB\u003c\/li\u003e\n\u003cli\u003e1 x Hole punch - HPW\u003c\/li\u003e\n\u003cli\u003e1 x Infrared Thermometer - IRT2\u003c\/li\u003e\n\u003cli\u003e1 x Extension Handle for CMEX5 - E5-HBS\u003c\/li\u003e\n\u003cli\u003eApp available for Android and iOS (phone not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDec Scanner - Measuring Range:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth of penetration:\u003c\/strong\u003e 152 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasuring Range: \u003c\/strong\u003e0 to 100 Comparative\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLimitations:\u003c\/strong\u003e Some EPDM, Butyl rubber roofing and other conductive roofing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRoof And Wall Scanner - Rws Measuring Range:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth of penetration: \u003c\/strong\u003e100mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSensitivity: Four Ranges:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eRoofing Mode with high and low sensitivity.\u003c\/li\u003e\n\u003cli\u003eEIFS \/ Foam Roof Insulation Mode with high and low sensitivity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConcrete Moisture Encounter X5 - Cmex5 - Measuring Range:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth of penetration in concrete: \u003c\/strong\u003eapprox. 20mm (¾\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture content for Concrete:\u003c\/strong\u003e 0 → 6.9 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComparative for Gypsum floor screed:\u003c\/strong\u003e 0 → 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCM Equiv Anhydrite\/Concrete:\u003c\/strong\u003e 0→2.7 \/ 0→4.3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference scale:\u003c\/strong\u003e 0 → 100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelative Humidity (with optional Hygro-i2® probe): \u003c\/strong\u003e0 → 99%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHumidity accuracy:\u003c\/strong\u003e 0% to 99%RH +\/- 2% @ 25°C\/77°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture content for wood (with optional wood pin probes): \u003c\/strong\u003e5 → 30 %\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInfrared Thermometer Irt2\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range:\u003c\/strong\u003e -50 to 650 ºC (-58ºF ~ 1202ºF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistance to Spot ratio:\u003c\/strong\u003e D:S = 12:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay resolution:\u003c\/strong\u003e 0.1 ºC(0.1ºF) \u0026lt;1000 1ºC \u0026gt;1000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy for targets:\u003c\/strong\u003e Assumes ambient operating temperature of 23 to 25 ºC (73 to 77ºF) -50 ~ 20ºC (-58ºF ~ 68ºF) ±2.5ºC(4.5ºF) 20ºC ~300ºC (68ºF ~572ºF) ±1.0% ±1.0ºC (1.8ºF) 300ºC ~650ºC (572ºF ~ 1202ºF) ±1.5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepeatability:\u003c\/strong\u003e -50~20ºC (-58~68ºF) : ±1.3ºC (2.3ºF) 20~650ºC (68~1202ºF): ±0.5% or ±0.5ºC (0.9ºF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResponse time:\u003c\/strong\u003e 150ms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpectral response:\u003c\/strong\u003e8~14um\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmissivity:\u003c\/strong\u003e Digitally adjustable from 0.10 to 1.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver range indication: \u003c\/strong\u003eLCD will show “----”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolarity:\u003c\/strong\u003e Automatic (no indication for positive polarity); Minus (-) sign for negative polarity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiode laser output:\u003c\/strong\u003e \u0026lt;1mW,Wavelength 630~670nm, Class 2 laser product\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temp.:\u003c\/strong\u003e 0 to 50ºC(32 to 122ºF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage temp.:\u003c\/strong\u003e –10 to 60ºC (14 to 140ºF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelative humidity:\u003c\/strong\u003e 10%~90%RH operating, \u0026lt;80%RH storage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply: \u003c\/strong\u003e9V battery, NEDA 1604A or IEC 6LR61, or equivalent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e \"CE\" Comply with EMC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications Of Kit:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize: \u003c\/strong\u003e1045mm x 535mm x 305mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 27kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 4 x 9 volt PP3 Batteries, 2 x AALR6 Alkaline Batteries (included))\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tramex","offers":[{"title":"EACH","offer_id":40506429112513,"sku":"RMK","price":17520.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/3138\/8353\/products\/Tramex_Roofing_Master_Kit_-_RMK.jpg?v=1628700488"},{"product_id":"tramex-roofing-inpection-kit-tmrik","title":"Roofing Inspector Kit","description":"\u003ch1\u003eTramex Roofing Inspector Kit RIK\u003c\/h1\u003e\n\u003ch2\u003eNon Destructive Flat Roof Scanner For Leak Detection, Tracing And Moisture Measuring And Surveying\u003c\/h2\u003e\n\u003ch4\u003eWith Accompanying Bluetooth App\u003c\/h4\u003e\n\u003cp\u003eThe Tramex RIK allows for point-of-contact, non-destructive moisture testing in roofing waterproofing systems up to approximately 10cm (4\") in depth with the RWS Roof \u0026amp; Wall Scanner. \u003c\/p\u003e\n\u003cp\u003eThe kit also allows for non-destructive measurement of moisture conditions in concrete decks and pin readings in wood decks and roofing materials, relative humidity readings, and ambient and dew point conditions using the Tramex CMEX5 digital moisture meter and probes. \u003c\/p\u003e\n\u003cp\u003eAn infrared surface thermometer gives surface temperature. \u003c\/p\u003e\n\u003cp\u003eThe Tramex Roofing Inspection Kit comes with an extension handle in a protective heavy-duty carrying case with die-cut foam lining. \u003c\/p\u003e\n\u003cp\u003eBluetooth connectivity to the Tramex Meters App allows for visualization of Tramex CMEX5 readings and data reporting to mobile devices, to GeoTag test results, create, save and share photos, reports and charts, as well as see your CMEX5 meter screen on your phone when extending to hard to reach places.\u003c\/p\u003e\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Concrete Moisture Encounter X5 - CMEX5.\u003c\/li\u003e\n\u003cli\u003e1 x Roof and Wall Scanner - RWS\u003c\/li\u003e\n\u003cli\u003e1 x Hand held electrode with 200mm insulated pins - HH14SP200B\u003c\/li\u003e\n\u003cli\u003e1 x 260mm narrow RH probe. RHP-NWB\u003c\/li\u003e\n\u003cli\u003e1 x Hole punch - HPW\u003c\/li\u003e\n\u003cli\u003e1 x Infrared Thermometer - IRT2\u003c\/li\u003e\n\u003cli\u003e1 x Extension Handle (for RWS).\u003c\/li\u003e\n\u003cli\u003e1 x Hard shell Carry Case - MAXRIK\u003c\/li\u003e\n\u003cli\u003eApp available for Android and iOS (phone not included).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRoof And Wall Scanner - Rws Measuring Range:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth of penetration: \u003c\/strong\u003e100mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity: Four Ranges:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eRoofing Mode with high and low sensitivity.\u003c\/li\u003e\n\u003cli\u003eEIFS \/ Foam Roof Insulation Mode with high and low sensitivity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConcrete Moisture Encounter X5 - Cmex5 - Measuring Range:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth of penetration in concrete: \u003c\/strong\u003eapprox. 20mm (¾\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture content for Concrete:\u003c\/strong\u003e 0 → 6.9 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComparative for Gypsum floor screed:\u003c\/strong\u003e 0 → 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCM Equiv Anhydrite\/Concrete:\u003c\/strong\u003e 0→2.7 \/ 0→4.3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference scale:\u003c\/strong\u003e 0 → 100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelative Humidity (with optional Hygro-i2® probe): \u003c\/strong\u003e0 → 99%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHumidity accuracy:\u003c\/strong\u003e 0% to 99%RH +\/- 2% @ 25°C\/77°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture content for wood (with optional wood pin probes): \u003c\/strong\u003e5 → 30 %\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInfrared Thermometer Irt2\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range:\u003c\/strong\u003e -50 to 650 ºC (-58ºF ~ 1202ºF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistance to Spot ratio:\u003c\/strong\u003e D:S = 12:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay resolution:\u003c\/strong\u003e 0.1 ºC(0.1ºF) \u0026lt;1000 1ºC \u0026gt;1000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy for targets:\u003c\/strong\u003e Assumes ambient operating temperature of 23 to 25 ºC (73 to 77ºF) -50 ~ 20ºC (-58ºF ~ 68ºF) ±2.5ºC(4.5ºF) 20ºC ~300ºC (68ºF ~572ºF) ±1.0% ±1.0ºC (1.8ºF) 300ºC ~650ºC (572ºF ~ 1202ºF) ±1.5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepeatability:\u003c\/strong\u003e -50~20ºC (-58~68ºF) : ±1.3ºC (2.3ºF) 20~650ºC (68~1202ºF): ±0.5% or ±0.5ºC (0.9ºF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResponse time:\u003c\/strong\u003e 150ms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpectral response:\u003c\/strong\u003e8~14um\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmissivity:\u003c\/strong\u003e Digitally adjustable from 0.10 to 1.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver range indication: \u003c\/strong\u003eLCD will show “----”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolarity:\u003c\/strong\u003e Automatic (no indication for positive polarity); Minus (-) sign for negative polarity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiode laser output:\u003c\/strong\u003e \u0026lt;1mW,Wavelength 630~670nm, Class 2 laser product\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temp.:\u003c\/strong\u003e 0 to 50ºC(32 to 122ºF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage temp.:\u003c\/strong\u003e –10 to 60ºC (14 to 140ºF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelative humidity:\u003c\/strong\u003e 10%~90%RH operating, \u0026lt;80%RH storage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply: \u003c\/strong\u003e9V battery, NEDA 1604A or IEC 6LR61, or equivalent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e \"CE\" Comply with EMC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications Of Kit:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 487mm x 380mm x 145mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.51kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 2 x 9 volt PP3 Batteries, 2 x AALR6 ALKALINE (Included)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tramex","offers":[{"title":"EACH","offer_id":40506429145281,"sku":"RIK","price":5455.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/3138\/8353\/products\/Tramex_Roofing_Inspector_Kit_-_RIK.jpg?v=1628700489"},{"product_id":"tramex-building-survey-master-kit-bsmk5-1","title":"Building Survey Master Kit","description":"\u003ch1\u003eTramex Building Survey Master Kit BSMK\u003c\/h1\u003e\n\u003ch2\u003eUltimate Moisture Meter Kit For Moisture And Humidity Surveying Of Buildings And Building Materials\u003c\/h2\u003e\n\u003ch3\u003eThe Tramex BSMK is the ultimate kit for non-destructive testing of moisture content and humidity conditions in drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing and numerous building materials and air spaces.\u003c\/h3\u003e\n\u003cp\u003eTramex moisture meters are designed to locate elevated moisture \u0026amp; humidity conditions, which may be conducive to mold, microbial growth and wood destroying organisms. \u003c\/p\u003e\n\u003cp\u003eThese damp conditions can often be hidden within or behind a material such as drywall and not obvious from visual inspection without the help of a non-destructive moisture meter. Once the moisture source is identified and stopped, remedial action can be taken leading to a healthier building environment. \u003c\/p\u003e\n\u003cp\u003eThe Tramex RWS Roof \u0026amp; Wall Scanner allows for for instant, non-destructive evaluation of moisture conditions deep within wall and roofing systems.The Tramex digital MRH III and reusable Ambient Relative Humidity Hygro-i2 Short Probe allow for testing relative humidity, temperature and dew point in the environment. \u003c\/p\u003e\n\u003cp\u003eThe heavy-duty pin-probes measure moisture content in wood, and the insulated 7.8\" (200mm) pins allow for deep wall cavity probing. \u003c\/p\u003e\n\u003cp\u003eConcrete slab in situ relative humidity testing can also be performed with the reusable relative humidity probe and enclosed hole liners. \u003c\/p\u003e\n\u003cp\u003eThe Tramex Building Survey Inspection Kit comes in a protective heavy-duty carrying case with die-cut foam lining.\u003c\/p\u003e\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Roof and Wall Scanner (with extension handle) - RWS\u003c\/li\u003e\n\u003cli\u003e1 x  Moisture and Humidity Meter - MEX5\u003c\/li\u003e\n\u003cli\u003e1 x Ambient Relative Humidity Hygro-i2 Short Probe - RHP-SW\u003c\/li\u003e\n\u003cli\u003e1 x Heavy-duty pin-type wood probe - HH14TP30\u003c\/li\u003e\n\u003cli\u003e1 x Infrared thermometer - IRT2\u003c\/li\u003e\n\u003cli\u003e1 x 200mm insulated pins for in-depth penetration using pin probe - SP200\u003c\/li\u003e\n\u003cli\u003e1 x Hole Punch - HPW\u003c\/li\u003e\n\u003cli\u003e8 x Ambient RH Probe Hole Liners - RHHL8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRoof And Wall Scanner - Rws - Measuring Range:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth of penetration: \u003c\/strong\u003e100mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity: \u003c\/strong\u003eFour Ranges - Roofing Mode with high and low sensitivity. EIFS \/ Foam Roof Insulation Mode with high and low sensitivity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMEX5 - Measuring Range:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth of penetration:\u003c\/strong\u003e up to 30mm (In wood, drywall)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference scale for building materials:\u003c\/strong\u003e 0 to 100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelative Humidity (with optional Hygro-i2® probe):\u003c\/strong\u003e 0 to 99%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWood Non-invasive Mode:\u003c\/strong\u003e 5 to 55% MC (at SG of 0.3)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWood Invasive Mode (with optional wood pin probes):\u003c\/strong\u003e 7 to 40%MC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInfrared Thermometer Irt2\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range: \u003c\/strong\u003e -50 to 650 ºC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistance to Spot ratio:\u003c\/strong\u003e D:S = 12:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay resolution:\u003c\/strong\u003e 0.1 ºF(0.1ºC) \u0026lt;1000 1ºC \u0026gt;1000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy for targets:\u003c\/strong\u003e Assumes ambient operating temperature of 73 to 77ºF (23 to 25 ºC) -58ºF ~ 68ºF (-50 ~ 20ºC) ±4.5ºF(2.5ºC) 68ºF ~572ºF (20ºC ~300ºC) ±1.0% ±1.8ºF (1.0ºC) 572ºF ~ 1202ºF (300ºC ~650ºC) ±1.5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepeatability: \u003c\/strong\u003e -58~68ºF (-50~20ºC) : ±2.3ºF(1.3ºC ) 68~1202ºF (20~650ºC): ±0.5% or ±0.9ºF (0.5ºC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResponse time:\u003c\/strong\u003e 150ms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpectral response:\u003c\/strong\u003e 8~14um\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmissivity:\u003c\/strong\u003e Digitally adjustable from 0.10 to 1.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver range indication: \u003c\/strong\u003e LCD will show \"----\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolarity:\u003c\/strong\u003e Automatic (no indication for positive polarity); Minus (-) sign for negative polarity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiode laser output:\u003c\/strong\u003e \u0026lt;1mW,Wavelength 630~670nm, Class 2 laser product\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temp.:\u003c\/strong\u003e 0 to 50ºC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage temp.:\u003c\/strong\u003e –10 to 60ºC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelative humidity:\u003c\/strong\u003e 10%~90%RH operating, \u0026lt;80%RH storage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 9V battery, NEDA 1604A or IEC 6LR61, or equivalent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e \"CE\" Comply with EMC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications Of Kit:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 487mm x 380mm x 145mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.0kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 3 x 9 volt PP3 Batteries (included)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tramex","offers":[{"title":"EACH","offer_id":40506429702337,"sku":"BSMK","price":5120.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/3138\/8353\/files\/bsmk-building-survey-master-kit-w1064.jpg?v=1776891919"},{"product_id":"tramex-ds2-dec-scanner-with-flight-case","title":"DEC Scanner with Flight Case DS2","description":"\u003ch1\u003eTramex DEC Scanner with Flight Case DS2\u003c\/h1\u003e\n\u003ch2\u003eNon Destructive Flat Roof Scanner For Leak Detection And Moisture Measuring And Surveying\u003c\/h2\u003e\n\u003cp\u003eThe Tramex Dec Scanner is a mobile non-destructive impedance scanner designed for the instant surveying of moisture conditions in flat roofing and waterproofing systems per ASTM D7954. \u003c\/p\u003e\n\u003cp\u003eThe Dec Scanner roofing moisture meter detects and measures leaks within the roofing structure. Ideal for water leak detection in roofing materials and integrity testing.\u003c\/p\u003e\n\u003ch3\u003eFeatuers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplies to ASTM D7954\u003c\/li\u003e\n\u003cli\u003eNon-destructive impedance moisture meter.\u003c\/li\u003e\n\u003cli\u003eThree ranges of sensitivity enabling the inspection of a variety of roof membranes and insulation thicknesses.\u003c\/li\u003e\n\u003cli\u003eErgonomic easy-reach and easy to operate control panel.\u003c\/li\u003e\n\u003cli\u003eLeak tracing, water leak detection, problem sourcing, and an instantaneous and clear indication of roof condition.\u003c\/li\u003e\n\u003cli\u003eFast readings over large roof areas in a short time frame.\u003c\/li\u003e\n\u003cli\u003eWork in normal daylight hours.\u003c\/li\u003e\n\u003cli\u003eFaster and more user friendly than nuclear meters.\u003c\/li\u003e\n\u003cli\u003eEasy and safe to use with no regulatory restrictions or operating license required.\u003c\/li\u003e\n\u003cli\u003eDependable solid state circuitry and rugged molded body for long-term reliability.\u003c\/li\u003e\n\u003cli\u003eBattery powered - 9 Volt PP3.\u003c\/li\u003e\n\u003cli\u003eDetect moisture in roofs without tearing them apart.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Dec Scanner detects and evaluates the moisture conditions within roofing systems by non-destructively measuring the electrical impedance. A low frequency electronic signal is generated, transmitted into the material under test via one of the two electrodes incorporated in the rubber electrode mat, and received by the second electrode. \u003c\/p\u003e\n\u003cp\u003eThe strength of this signal varies in proportion to the amount of moisture in the material under test. The Dec Scanner determines the strength of the current and converts this to a comparative moisture content value. By moving the Dec Scanner across a roof surface in a regular pattern, a continuous reading is obtained, and areas that contain moisture can be readily identified.\u003c\/p\u003e\n\u003ch3\u003eOperating procedure:\u003c\/h3\u003e\n\u003cp\u003eMoisture detection testing can be done at the time of installation for warranty auditing and quality control, as part of an ongoing maintenance program, or prior to re-roofing or repair of damaged roofs. \u003c\/p\u003e\n\u003cp\u003eThe Dec Scanner is a durable but lightweight instrument that is easily transported to the roof surface. Having determined a known acceptably dry area, one of three sensitivity ranges is selected, and the Dec Scanner is ready to use. \u003c\/p\u003e\n\u003cp\u003eWithout causing any damage to the roof surface, the Dec Scanner is moved over the tested area. The Dec Scanner gives continuous moisture condition readings, from which a moisture map of the surface can be drawn up, and leaks traced to their source.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable border=\"0\" cellpadding=\"2\" cellspacing=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30”W x 15¾“D x 6¼”H (762 mm x 400 mm x 158 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eScanning area:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24”W x 15.5”D (609 mm x 394mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCarry case size:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e38”W x 20”D x 10”H (940mm x 508 mm x 270mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight Dec Scanner:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24.6 lbs (9.95 Kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight Carry Case:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e21.9 lbs (9.9 Kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal Weight Dec Scanner in Carry Case:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e46.5 lbs (21.1 Kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOuter packaging carton weight:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.4 lbs (2 Kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal shipping weight:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e51 lbs (23.1Kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensional shipping weight:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e66 lbs (30 Kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAnalog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMeasuring Range:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 to 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eComparative Max. depth of penetration:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6” (152 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Supply:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 x 9 Volt PP3 Batteries (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLimitations:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSome EPDM, Butyl rubber roofing and other conductive roofing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eRange selection:\u003c\/h3\u003e\n\u003cp\u003eThe Dec Scanner has an integrated and adjustable calibration ability allowing for precise comparative readings. There are 3 Ranges, and they should be selected as best suits the surface under test, for example:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRange 1 - \u003c\/strong\u003eMost suitable for single-ply and thin roof coverings such as PVC, Hypalon and other smooth surfaces where insulation is wet and moisture is close to the surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRange 2 - \u003c\/strong\u003eMost suitable for multi-ply built-up and modified systems, mineral surfaced felts, and other smooth or gravel surfaces where insulation is less wet and moisture is below the surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRange 3 - \u003c\/strong\u003eMost suitable for thicker roof coverings such as mastic asphalt, thick gravel and stone surfaced roofing\u003c\/p\u003e","brand":"Tramex","offers":[{"title":"EACH","offer_id":40506430095553,"sku":"DS2","price":13600.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/3138\/8353\/products\/Tramex_Dec_Scanner_-_DS2_5.jpg?v=1628700507"},{"product_id":"tramex-rws-roof-and-wall-scanner","title":"RWS Roof and Wall Scanner","description":"\u003ch1\u003eTramex Roof and Wall Scanner - RWS\u003c\/h1\u003e\n\u003cp\u003eThe Tramex RWS Roof and Wall Scanner is a multi-mode non-invasive impedance scanner designed for the instant, precise and non-destructive evaluation of moisture conditions and leak tracing in roofing per ASTM D7954 and in wall systems of the building envelope.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplies with ASTM D7954.\u003c\/li\u003e\n\u003cli\u003eFor non-destructive moisture evaluation of roofs, EIFS, foam insulation systems \u0026amp; other building envelope applications.\u003c\/li\u003e\n\u003cli\u003eTo evaluate the extent of the moisture problem and help trace and pin-point its source.\u003c\/li\u003e\n\u003cli\u003eMulti-mode functions allowing for depth penetration and sensitivity selection.\u003c\/li\u003e\n\u003cli\u003eFast and easy to operate giving instant clear readings.\u003c\/li\u003e\n\u003cli\u003e\"Hold” function facilitates ease of recording readings.\u003c\/li\u003e\n\u003cli\u003eLightweight, handheld and battery operated.\u003c\/li\u003e\n\u003cli\u003eTelescopic handle (for use on roofs).\u003c\/li\u003e\n\u003cli\u003eInexpensive to purchase and operate compared to other non-destructive testing methods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize: \u003c\/strong\u003e125mm x 275mm x 75mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 853g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e ABS Body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 9 volt PP3 Battery (included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay: \u003c\/strong\u003eAnalog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth of penetration:\u003c\/strong\u003e 100mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSensitivity\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Ranges: \u003c\/strong\u003eRoofing Mode with high and low sensitivity. EIFS \/ Foam Roof Insulation Mode with high and low sensitivity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAccessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLeather carry case.\u003c\/li\u003e\n\u003cli\u003eTelescopic handle for use on roofs only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSome EPDM, Butyl rubber roofing and other conductive roofing. Hard Coat Stucco, wire lath or wire mesh reinforced finishes.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tramex","offers":[{"title":"EACH","offer_id":40506430161089,"sku":"RWS","price":2575.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/3138\/8353\/products\/Tramex_Roof_and_Wall_Scanner_-_RWS.jpg?v=1628700508"}],"url":"https:\/\/moisturemeterexperts.com.au\/collections\/roofing\/material_insulation.oembed","provider":"Moisture Meter Experts","version":"1.0","type":"link"}